Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGENESIS2021GV80 2.5T ADVANCED, AWDREPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSAIRBAG MODULES AND CLOCK SPRINGAIRBAG MODULE DISPOSALDESCRIPTION & OPERATIONAIRBAG DISPOSALNOTES
2021 Genesis GV80 2.5T Advanced, AWD
Airbag Disposal: Notes
2021 Genesis GV80 2.5T Advanced, AWDSECTION Notes
When you scrap a vehicle equipped with an airbag, you must deploy it first.
When you deploy an airbag, you need to have a skilled mechanic do the work. The used airbag should not be reinstalled in another vehicle for reuse.
CAUTION:
- Upon deployment, the explosion will create a loud noise, so you have to do it in a proper place not to disturb others.
- When you deploy an airbag, use a specially designated tool and select a place where there is no electric noise.
- When operating the airbag deployment tool, you must be at least 5 meters away from the airbag.
- Upon deployment, the airbag gives off an intense heat. So wait for 30 minutes or so before touching it.
- Make sure to use gloves and safety goggles when you deal with the deployed airbag.
- Do not spread water over the deployed airbag.
- Always wash your hands after the deployment work is completed.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.