SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGENESIS2021GV80 2.5T ADVANCED, AWDREPAIR AND DIAGNOSISELECTRICALGAUGESINDICATORS AND GAUGESINSTRUMENT CLUSTERREPAIR PROCEDURESINSPECTIONNOTES
2021 Genesis GV80 2.5T Advanced, AWD

Repair Procedures: Inspection: Notes

2021 Genesis GV80 2.5T Advanced, AWDSECTION Notes
WARNING:
  • Warning and guide sounds regarding engine start and driving are generated through the external amplifier. (Hazard lamp, seat belt warning, turn signal, HDA Hand OFF, LKAS, RCTA, etc.)
  • When the external amplifier or speakers are replaced with other products, a failure may occur in the amplifier and warning and guide sounds (excluding the ETCS guide sound) may not be generated.
  • Virtual engine sound inside the vehicle (occurs in Sport mode) is generated by the external amplifier. Therefore, if the external amplifier or speakers are replaced with other products, a failure may occur in the amplifier and virtual engine sound may not be generated properly.
  1. Check point (Warning indicator)
    NOTE: Fault conditions and normal operating conditions, refer to the owner's manual.
    No Ref Symbol Name Color Signal Input Signal Control Check Point
    1
    G14723960Courtesy of HYUNDAI MOTOR AMERICA
    		 Turn signal (Left) Green CAN IGPM (Gateway)
    1. Multifunction switch
    2. IBU
    3. IGPM
    4. CAN failure
    2
    G14723961Courtesy of HYUNDAI MOTOR AMERICA
    		 Turn signal (Right) Green CAN IGPM (Gateway)
    1. Multifunction switch
    2. IBU
    3. IGPM
    4. CAN failure
    3
    G14723962Courtesy of HYUNDAI MOTOR AMERICA
    		 Tail Lamp Green CAN IGPM (Gateway)
    1. Multifunction switch
    2. IBU
    3. IGPM
    4. CAN failure
    4
    G14723963Courtesy of HYUNDAI MOTOR AMERICA
    		 Low Beam Green CAN IGPM (Gateway)
    1. Multifunction switch
    2. IBU
    3. IGPM
    4. CAN failure
    5   HBA Green CAN LKAS
    1. LKAS System
    2. CAN failure
    6   Rear Fog Lamp Yellow CAN IGPM
    (Gateway)
    1. Multifunction Switch
    2. IBU
    3. IGPM
    4. CAN Failure
    7
    G14723964Courtesy of HYUNDAI MOTOR AMERICA
    		 High Beam Blue CAN IGPM
    (Gateway)
    1. Multifunction switch
    2. IBU
    3. IGPM
    4. CAN failure
              BSD
    1. BSD System
    2. CAN failure
              PSB
    1. PSB System
    2. IGPM
    3. CAN failure
    8
    G14723965Courtesy of HYUNDAI MOTOR AMERICA
    		 Warning Yellow CAN Hard-wired SCC ECS
    1. SCC System
    2. AEB System
    3. LDWS System
    4. AHLS System
    5. TPMS System
    6. HSWS System
              Low Washer Digital Input
    1. Washer fluid lever sensor
    2. Wiring failure Reminders when service checks
    9
    G14723966Courtesy of HYUNDAI MOTOR AMERICA
    		 Battery Charge Red Hard-wired Alternator
    1. Alternator
    2. Wiring Failure
    3. Battery
    10
    G14723967Courtesy of HYUNDAI MOTOR AMERICA
    		 Oil Pressure Red Hard-wired ECM
    1. Oil pressure sensor
    2. Wiring Failure
    3. ECM
    4. CAN failure
    11
    G14723968Courtesy of HYUNDAI MOTOR AMERICA
    		 Check Engine Yellow CAN ECM
    1. ECM
    2. CAN failure
    12   Immobilizer Yellow CAN Hard-wired IGPM (Gateway)
    1. SMK System
    2. IGPM
    3. CAN failure
    4. Hard-wired
    13
    G14723969Courtesy of HYUNDAI MOTOR AMERICA
    		 Parking Brake
    Brake Fluid
    EBD
    EPB
    EVP    		 Red CAN IGPM (Gateway) EBD
    EPB
    1. IGPM
    2. VDC System
    3. EPB System
    4. CAN failure
    5. Parking Brake Switch
    6. Brake Oil lever sensor
    14
    G14723970Courtesy of HYUNDAI MOTOR AMERICA
    		 ABS Yellow CAN ABS
    1. TCS System
    2. CAN failure
    15
    G14723971Courtesy of HYUNDAI MOTOR AMERICA
    		 ESC Yellow CAN TCS
    1. TCS System
    2. CAN failure
    16
    G14723972Courtesy of HYUNDAI MOTOR AMERICA
    		 ESC Off Yellow CAN TCS
    1. TCS System
    2. CAN failure
    17
    G14723973Courtesy of HYUNDAI MOTOR AMERICA
    		 EPB Yellow CAN EPB
    1. EPB System
    2. CAN failure
    18
    G14723974Courtesy of HYUNDAI MOTOR AMERICA
    		 LED Head lamp Yellow CAN AFLS
    1. AFLS System
    2. CAN failure
    19   AFS System Yellow CAN AFLS
    1. AFLS System
    2. CAN failure
    20
    G14723975Courtesy of HYUNDAI MOTOR AMERICA
    		 Seat Belt Red CAN IGPM
    (Gateway)
    1. IGPM
    2. CAN failure
    21
    G14723976Courtesy of HYUNDAI MOTOR AMERICA
    		 Airbag Red CAN SRSCM
    1. SRSCM System
    2. CAN failure
    22
    G14723977Courtesy of HYUNDAI MOTOR AMERICA
    		 EPS (MDPS) Red CAN MDPS
    1. MDPS Unit system
    2. MDPS Motor
    3. CAN failure
    23
    G14723978Courtesy of HYUNDAI MOTOR AMERICA
    		 TPMS Yellow CAN TPMS
    1. TPMS System
    2. TPMS sensor
    3. CAN failure
    24
    G14723979Courtesy of HYUNDAI MOTOR AMERICA
    		 4WD Yellow CAN 4WD
    1. 4WD ECU
    2. CAN failure
    25
    G14723980Courtesy of HYUNDAI MOTOR AMERICA
    		 Fuel Warning Yellow Direct (Micom) Fuel Segment
    1. Fuel Segment Failure
    2. Wiring Failure
    26   FCA Yellow CAN AEB
    1. SCC System
    2. CAN failure
    27
    G14723981Courtesy of HYUNDAI MOTOR AMERICA
    		 Diesel Particulate Filter (GPF) Yellow CAN ECM
    1. GPF System
    2. CAN Failure
    28   Gasoline Particulate Filter (GPF) Yellow CAN ECM
    1. GPF System
    2. CAN Failure
    29
    G14723982Courtesy of HYUNDAI MOTOR AMERICA
    		 Preheating plug warning Yellow CAN EMS
    1. CAN Failure
  2. Check point (Gauge)
    No Name Signal Input Signal Control (Unit/Sensor) Check Point
    1 Speedometer C-CAN TCU CAN Line failure
    2 Tachometer C-CAN ECM CAN Line failure
    3 Cooling water temperature C-CAN ECM CAN Line failure
    4 Fuel Hardwire Fuel Sander Fuel sender failure
    Wiring failure
  3. Other cluster check list
    1. USM (User Setting Mode)

      USM setting process

      Setting can be changed by using the buttons of the steering switch. The items include In/out Seat Synchronization, vAuto Door Lock, Auto Door Lock Deactivate, Head Lamp Escort, Welcome Light, Welcome Sound, Triple Turn Signal, Average Fuel Consumption Auto Reset, HUD Height Adjustment, Brightness, and Content Setup. These items can be set and changed.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.