Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
FCA (SCC)
2021 Genesis GV80 2.5T Advanced, AWDSECTION FCA (SCC)
Autonomous Emergency Braking (AEB) is designed to avoid collision or reduce damages from an accident caused by delayed braking or insufficient braking power due to distraction of the driver. System control process is as follows:
- AEB uses a Radar sensor and LKAS (Lane Keeping Assist System) Camera sensor to detect vehicles ahead and data fusion.
- AEB identifies the AEB controllable status using fusion detection data.
- AEB calculates required deceleration speed depending on the speed/distance of vehicles ahead.
- AEB transmits the calculated "Required Deceleration Speed" to ESP (Electronic Stability Program, ESC (Electronic Stability Control)) through CAN (Controller Area Network) communication.
- ESP (ESC) calculates a required torque to implement "Required Deceleration Speed", and then controls the brake control.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.