Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGENESIS2021G80 2.5T ADVANCED, AWDREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLELECTRONIC STABILITY CONTROL DIAGNOSIS (3 OF 3)
2021 Genesis G80 2.5T Advanced, AWD
Electronic Stability Control Diagnosis (3 Of 3)
2021 Genesis G80 2.5T Advanced, AWDSECTION Electronic Stability Control Diagnosis (3 Of 3)
- DTC C1845-87: Communication Error - RWS
- DTC C1846-87: Communication Error - SBW
- DTC C1847-82: Communication Error - PCA
- DTC C1847-83: Communication Error - PCA (CRD)
- DTC C1847-87: Communication Error - PCA (Time-Out)
- DTC C2112-01: Valve Relay Error
- DTC C2202-77: EPB Actuator Latching Failure
- DTC C2220-71: Rear-LH Actuator
- DTC C2220-74: Rear-LH Actuator (Operation Timeout)
- DTC C2220-77: Rear-LH Actuator (Motor Stall)
- DTC C2220-94: Rear-LH Actuator (Abnormal Motor Operation)
- DTC C2222-08: Actuator Failure - 4WD
- DTC C2224-71: Rear-RH (Or Rear) Actuator
- DTC C2224-74: Rear-RH (Or Rear) Actuator
- DTC C2224-77: Rear-RH Actuator (Motor Stall)
- DTC C2224-94: Rear-RH Actuator (Abnormal Motor Operation)
- DTC C2227-07: Excessive Temperature Of Brake Disc
- DTC C2228-08: Actuator Failure - TCU
- DTC C2240-77: Unknown Actuator State
- DTC C2244-06: EPB Incomplete Operation
- DTC C2380-01: ABS/TCS/ESP Valve Error
- DTC C2402-01: Motor Electrical
- DTC C2402-4B: Motor Electrical
- DTC C2402-71: Motor Electrical
- DTC C2404-28: Servo Motor Circuit
- DTC C2405-27: Motor Encoder Fault
- DTC C2416-01: Motor Short Or Open - LH
- DTC C2416-11: Motor Short Or Open - LH
- DTC C2416-12: Motor Short Or Open - LH
- DTC C2416-13: Motor Short Or Open - LH
- DTC C2416-19: Motor Short Or Open - LH
- DTC C2416-71: Motor Short Or Open - LH (Stuck)
- DTC C2417-01: Motor Short Or Open - RH
- DTC C2417-11: Motor Short Or Open - RH
- DTC C2417-12: Motor Short Or Open - RH
- DTC C2417-13: Motor Short Or Open - RH
- DTC C2417-19: Motor Short Or Open - RH
- DTC C2417-71: Motor Short Or Open - RH (Stuck)
- DTC C2418-77: Motor Stall - LH
- DTC C2419-77: Motor Stall - RH
- DTC C2430-78: Uncalibrated Motor Position Sensor
- DTC C2431-77: Incomplete Motor Position Recovering (temporary)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.