Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGENESIS2021G80 2.5T ADVANCED, AWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTEXTERIOR LIGHTSAUTO LIGHTING CONTROL SYSTEMDESCRIPTION AND OPERATIONFUNCTIONS AND OPERATING PRINCIPLESAUTOMATIC OPERATION
2021 Genesis G80 2.5T Advanced, AWD
Automatic Operation
2021 Genesis G80 2.5T Advanced, AWDSECTION Automatic Operation
- Operational status of rain sensor
Operation Mode Operation Direct Mode It is the normal operational status of the integrated rain sensor when the wiper switch is in "Auto" and the sensor detected dry windshield. Based on this state, integrated rain sensor determines the operation mode of wiper depending on the rainfall and its duration. Intermittent Mode Integrated rain sensor activates the intermittent mode when wiper operation is done successively more than twice with a pause of 0.5 - 5 seconds. Low Speed The wiper operates continuously in low speed High Speed The wiper operates continuously in high speed - Operational status of light sensor
Operation Mode Operation Auto Mode It is the normal operational status of the integrated rain sensor when the head lamp switch is in "Auto" and the sensor detected the brightness of the light. Based on this state, the Integrated rain sensor determines the operation mode of head lamp and internal multimedia depending on the amount of light measured. Low beam ON The lamp and multimedia turn on at medium brightness. High beam ON The lamp and multimedia turn on at maximum brightness. - Operational status of solar load sensor
Operation Mode Operation Auto Mode It is the normal operational status of the integrated rain sensor when the air conditioner switch is in "Auto" and the sensor detected the amount of sunlight. Based on this state, the integrated rain sensor determines the operation mode of air conditioning system depending on the amount of sunlight measured. Manual Mode The cooling intensity is controlled manually.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.