DTC Information: DTC Detecting Condition

2020 Genesis G90 3.3T Premium, AWDSECTION DTC Detecting Condition
Item Conditions for setting DTC Possible Cause
DTC Strategy
  • Check LIN communication
  1. RSM* LIN line open/poor connection
  2. RSM** LIN line short to battery
  3. RSM** LIN line short to ground
  4. LIN communication line protocol error from electrical noise
Enable Conditions
  • IG key "ON"
Threshold Value
  • RSM*'s LIN data is not received
Diagnostic Time
  • Immediately
DTC Erasing
  • Erased DTC after solved problem
NOTE: RSM*: "RAIN SENSOR"
IBU*: "IBU CONTROL MODULE"
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.