Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2024SIERRA 2500 HD DENALI ULTIMATEREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSCOMPONENT CONNECTOR END VIEWS (K111 - K219)COMPONENT CONNECTOR END VIEWSK111 FUEL PUMP POWER CONTROL MODULE (L5P & N2N)
2024 GMC Sierra 2500 HD Denali Ultimate
K111 Fuel Pump Power Control Module (L5P & N2N)
2024 GMC Sierra 2500 HD Denali UltimateSECTION K111 Fuel Pump Power Control Module (L5P & N2N)
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool |
|---|---|---|---|
| I | Not required | J-35616-12 (BU) | No Tool Required |
| II | Not required | J-35616-35 (VT) | No Tool Required |
| III | Not required | J-35616-40 (BU) | No Tool Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 2.5 | WH / BN | 4138 | Fuel Pump Supply Voltage Phase 3 | III | - |
| 2 | 2.5 | GY | 120 | Fuel Pump Control | II | - |
| 3 | 0.5 | VT / WH | 639 | Run/Crank Ignition 1 Voltage | II | - |
| 4 - 5 | - | - | - | Not Occupied | - | - |
| 6 | 0.75 | BU / GN | 11437 | Secondary Fuel Pump Disable Signal | I | - |
| 7 | 0.5 | WH | 4055 | Private Serial Data Powertrain CAN Bus [+] Serial Data | I | - |
| 8 | 0.5 | BU / GY | 4054 | Private Serial Data Powertrain CAN Bus [-] Serial Data | I | - |
| 9 | - | - | - | Not Occupied | - | - |
| 10 | 0.75 | VT / GN | 4320 | Powertrain Sensor Bus Enable | I | - |
| 11 | 0.5 | GN / GY | 465 | Fuel Pump Primary Relay Control | I | - |
| 12 | - | - | - | Not Occupied | - | - |
| 13 | 1 | BU / GN | 2120 | Secondary Fuel Pump Control | II | - |
| 14 | 2.5 | BK / WH | 1951 | Signal Ground | III | - |
| 15 | 0.75 | WH | 7444 | Fuel Pump Assembly Shield Ground | I | - |
| 16 | 0.5 | BU / YE | 6861 | Water In Fuel Sensor Signal | I | - |
| 17 - 18 | - | - | - | Not Occupied | - | - |
| 19 | 0.5 | BN / RD | 7445 | Fuel Line Pressure Sensor 5V Reference | I | - |
| 20 | 0.75 | BU / WH | 7446 | Fuel Pressure Sensor Signal | I | - |
| 21 | 0.5 | BK / GN | 6281 | Fuel Level Sensor Low Reference | I | - |
| 22 | 0.5 | BK / BU | 6282 | Fuel Level Sensor 2 Low Reference | I | - |
| 23 | 0.5 | BK / BU | 6863 | Water In Fuel Sensor Low Reference | I | - |
| 24 | 0.5 | BN / WH | 7073 | Fuel Temperature Sensor 1 Low Reference | I | - |
| 25 - 29 | - | - | - | Not Occupied | - | - |
| 30 | 2.5 | YE / GY | 4137 | Fuel Pump Supply Voltage Phase 2 | III | - |
| 31 - 34 | - | - | - | Not Occupied | - | - |
| 35 | 0.5 | BK / YE | 7447 | Fuel Pressure Sensor Low Reference | I | - |
| 36 | 0.5 | BN / GY | 7072 | Fuel Temperature Sensor 1 Signal | I | - |
| 37 | 0.75 | BU / GN | 1936 | Primary Fuel Level Sensor Signal | I | - |
| 38 | 0.5 | BU / WH | 1937 | Secondary Fuel Level Sensor Signal | I | - |
| 39 - 43 | - | - | - | Not Occupied | - | - |
| 44 | 1 | BK / GN | 1580 | Fuel Pump Low Reference | I | - |
| 45 | - | - | - | Not Occupied | - | - |
| 46 | 2.5 | RD / VT | 1940 | Battery Positive Voltage | III | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.