Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2023CANYON ELEVATION, 4WDREPAIR AND DIAGNOSISELECTRICALGAUGESINSTRUMENT PANEL AND CONSOLE TRIMSPECIFICATIONSFASTENER SPECIFICATIONS
2023 GMC Canyon Elevation, 4WD
Fastener Specifications
2023 GMC Canyon Elevation, 4WDSECTION Fastener Specifications
Front Floor Console Armrest Dampener
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Floor Console Armrest Nut [2x] | - | - | 3 N.m (27 lb in) | Front Floor Console Armrest Dampener Replacement |
Front Floor Console Cup Holder
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Floor Console Cup Holder Bolt [5x] | - | - | 1 N.m (9 lb in) | Front Floor Console Cup Holder Replacement |
Front Floor Console Extension
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Floor Console Extension Bolt [2x] | - | - | 9 N.m (80 lb in) | Front Floor Console Removal and Installation |
Front Floor Console Rear Cup Holder
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Floor Console Rear Compartment Bolt [6x] | - | - | 1 N.m (9 lb in) | Front Floor Console Rear Cup Holder Replacement |
Front Floor Lower Console
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Floor Lower Console Bolt [6x] | - | - | 9 N.m (80 lb in) | Front Floor Console Removal and Installation |
Front Floor Rear Console Trim Plate
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Floor Rear Console Trim Plate Bolt [3x] | - | - | 1 N.m (9 lb in) | Front Floor Rear Console Trim Plate Replacement |
Instrument Panel
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Instrument Panel Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Instrument Panel Trim Plate Applique Replacement |
| 2 | Instrument Panel Cluster Trim Plate Bolt [11x] | - | - | 2.5 N.m (22 lb in) | Instrument Panel Cluster Trim Plate Replacement |
| 3 | Instrument Panel Knee Bolster Bolt [3x] | - | - | 2.5 N.m (22 lb in) | Instrument Panel Knee Bolster Replacement |
| 4 | Instrument Panel Trim Pad Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Instrument Panel Trim Pad Replacement - Right Side |
Instrument Panel Carrier
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Instrument Panel Carrier Bolt [19x] | - | - | 2.5 N.m (22 lb in) | Instrument Panel Carrier Replacement |
| Instrument Panel Carrier Removal and Installation | |||||
| 2 | Instrument Panel Center Trim Panel Bolt [5x] | - | - | 2.5 N.m (22 lb in) | Instrument Panel Carrier Replacement |
| Instrument Panel Carrier Removal and Installation |
Instrument Panel Steering Column Lower Trim Cover
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Instrument Panel Steering Column Lower Trim Cover Bolt [3x] | - | - | 3.3 N.m (29 lb in) | Instrument Panel Steering Column Lower Trim Cover Replacement |
Instrument Panel Switch Trim Plate Retainer
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Instrument Panel Switch Trim Plate Bolt [2x] | - | - | 0.8 N.m (7 lb in) | Instrument Panel Carrier Replacement |
Instrument Panel Tie Bar
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Instrument Panel Tie Bar Bolt [5x] | - | - | 22 N.m (16 lb ft) | Instrument Panel Tie Bar Replacement |
| 2 | Instrument Panel Tie Bar Brace Bolt [2x] | - | - | 22 N.m (16 lb ft) | Instrument Panel Tie Bar Replacement |
Instrument Panel Upper Trim Panel
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Instrument Panel Airbag Bolt | - | - | 9 N.m (80 lb in) | Instrument Panel Upper Trim Panel Replacement |
| Instrument Panel Upper Trim Panel Removal and Installation | |||||
| 2 | Instrument Panel Upper Trim Panel Bolt [15x] | - | - | 2.5 N.m (22 lb in) | Instrument Panel Upper Trim Panel Replacement |
| Instrument Panel Upper Trim Panel Removal and Installation |
Instrument Panel Wiring Harness
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Instrument Panel Wiring Harness Connector Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Instrument Panel Tie Bar Replacement |
| Instrument Panel Wiring Harness Replacement (UV6) , or Instrument Panel Wiring Harness Replacement (without UV6) | |||||
| 2 | Instrument Panel Wiring Harness Ground Nut [5x] | - | - | 6 N.m (53 lb in) | Instrument Panel Tie Bar Replacement |
| Instrument Panel Wiring Harness Replacement (UV6) , or Instrument Panel Wiring Harness Replacement (without UV6) |
Serial Data Gateway Bracket
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Serial Data Gateway Module Bracket Bolt [5x] | - | - | 2.5 N.m (22 lb in) | Instrument Panel Tie Bar Replacement |
| Instrument Panel Wiring Harness Replacement (UV6) , or Instrument Panel Wiring Harness Replacement (without UV6) |
Side Window Defogger Outlet Grille
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Side Window Defogger Outlet Bolt | - | - | 1.0 N.m (9 lb in) | Instrument Panel Upper Trim Panel Replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.