Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2023CANYON ELEVATION, 4WDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTCELLULAR, ENTERTAINMENT, AND NAVIGATION - FASTENER SPECIFICATIONSSPECIFICATIONS
2023 GMC Canyon Elevation, 4WD
Fastener Specifications
2023 GMC Canyon Elevation, 4WDSECTION Specifications
Audio Amplifier (UQA)
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radio Speaker Amplifier Nut [3x] | - | - | 9 N.m (80 lb in) | Audio Amplifier Replacement (UQA) |
High Frequency Antenna
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | High Frequency Antenna Bolt | - | - | 9 N.m (80 lb in) | High Frequency Antenna Replacement |
Instrument Panel Speakers
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radio Front Center Speaker Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Radio Front Center Speaker Replacement (UQA) |
| 2 | Radio Front Speaker Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Radio Front Speaker Replacement |
| 3 | Regulatory Emergency Call Backup Speaker Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Regulatory Emergency Call Backup Speaker Replacement (UER) |
Radio and Infotainment Control Module Bracket
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radio and Infotainment Control Module Bracket Bolt [3x] | - | - | 2.5 N.m (22 lb in) | Instrument Panel Tie Bar Replacement |
Radio Control
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radio Control Bolt [3x] | - | - | 2.5 N.m (22 lb in) | Radio Control Replacement |
Radio Control Switch
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Cruise Control Switch Bolt [2x] | - | - | 10 N.m (89 lb in) | Radio Control Switch Replacement - Steering Wheel |
Radio Front Side Door Speaker
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radio Front Side Door Speaker Bolt | - | - | 2.5 N.m (22 lb in) | Radio Front Side Door Speaker Replacement |
Radio Rear Side Door Speaker
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radio Rear Side Door Speaker Bolt | - | - | 2.5 N.m (22 lb in) | Radio Rear Side Door Speaker Replacement |
Steering Wheel
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Cruise Control Switch Bolt | - | - | 10 N.m (89 lb in) | Radio Volume Switch Replacement |
| Radio Favorites Switch Replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.