Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2022 GMC Sierra 1500 SLT, 6.2L Eng VIN L
Quick Lookups: Fluids
2022 GMC Sierra 1500 SLT, 6.2L Eng VIN LSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.30 OZS. | 0.09 L | PAG Oil | S | |||
| Air Cond Refrigerant | 1.40 LBS. | 0.63 KG | R-1234yf | S | |||
| Automatic Transmission Fluid | Trans Mfr CD 10L80/MHS | Complete Trans System Fluid | 12.08 QTS. | 11.43 L | Automatic Transmission Fluid DEXRON ULV | All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S |
| Automatic Transmission Fluid | Trans Mfr CD 10L80/MHS | Overhaul | 11.57 QTS. | 10.94 L | Automatic Transmission Fluid DEXRON ULV | All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S |
| Automatic Transmission Fluid | Trans Mfr CD 10L80/MHS | Pan Removal and Filter Replacement | 8.10 QTS. | 7.66 L | Automatic Transmission Fluid DEXRON ULV | All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S |
| Brake Fluid | 2.11 PTS. | 0.99 L | DOT 4 Hydraulic Brake Fluid | S | |||
| Diesel Exhaust Fluid | 5.30 GALS. | 20.06 L | Diesel Exhaust Fluid that meets ISO 22241 or displays the API Diesel Exhaust Fluid Certification Mark. | S | |||
| Differential Gear Oil | Front Axle 8.0",w/G93 | 1.16 QTS. | 1.09 L | GM Part No. 19300457. | S | ||
| Differential Gear Oil | Front Axle 8.0",w/SU4 | 1.16 QTS. | 1.09 L | GM Part No. 19300457. | S | ||
| Differential Gear Oil | Front Axle 8.25",w/SU5 | 1.67 QTS. | 1.58 L | GM Part No. 19368514. | S | ||
| Differential Gear Oil | Rear Axle 8.6" | 2.11 QTS. | 1.99 L | GM Part No. 19300457. | S | ||
| Differential Gear Oil | Rear Axle 9.5",w/SU7 | 2.59 QTS. | 2.45 L | GM Part No. 19300457. | S | ||
| Differential Gear Oil | Rear Axle 9.5",w/SU8 | 2.64 QTS. | 2.49 L | GM Part No. 19368514. | S | ||
| Differential Gear Oil | Rear Axle 9.76",w/G80 | 2.75 QTS. | 2.6 L | GM Part No. 19300457. | S | ||
| Differential Gear Oil | Rear Axle 9.76",w/G94 | 2.75 QTS. | 2.6 L | GM Part No. 19300457. | S | ||
| Engine Coolant | 6.2L Eng | 13.30 QTS. | 12.58 L | 50/50 mixture of DEX-COOL and clean, drinkable water | All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S | |
| Engine Oil | 6.2L Eng | w/Filter | 8.00 QTS. | 7.57 L | API - SAE 0W-40 DexosR | GM Engine Oil Recall: Fill engine with NEW 0W-40 Engine Oil. Replace the oil fill cap with the NEW 0W-40 oil cap Part No.12713787 | S |
| Engine Oil | 6.2L Eng | w/o Filter | 7.50 QTS. | 7.09 L | API - SAE 0W-40 DexosR | GM Engine Oil Recall: Fill engine with NEW 0W-40 Engine Oil. Replace the oil fill cap with the NEW 0W-40 oil cap Part No.12713787 | S |
| Fuel Tank | 6.2L Eng | 24.00 GALS. | 90.84 L | S | |||
| Transfer Case Fluid | 1.60 QTS. | 1.51 L | Automatic Transmission Fluid DEXRON VI | S | |||
| Windshield Washer Fluid | N/A | N/A | Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.