K9 Body Control Module X4

2020 GMC Savana 3500 LS, Van Passenger, 6.0L Eng VIN B, Gas/EthanolSECTION K9 Body Control Module X4
GM1664499Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 15482792
  • Service Connector: 88988841
  • Description: 25-Way F HIT Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I 13575870 J-35616-64B (LT BU) J-38125-12A Not Required Not Required Not Required Not Required
II 13578820 J-35616-64B (LT BU) J-38125-12A Not Required Not Required Not Required Not Required
III 13587507 J-35616-35 (VT) J-38125-12A Not Required Not Required Not Required Not Required
Pin Size Color Circuit Function Terminal Type ID Option
1 0.8 RD/WH 2740 Secondary Fused Battery Positive Voltage 27 III -
2 0.8 RD/WH 3040 Secondary Fused Battery Positive Voltage 30 III -
3 0.8 RD/WH 2940 Secondary Fused Battery Positive Voltage 29 III -
4 0.8 RD/WH 2240 Secondary Fused Battery Positive Voltage 22 III -
5 0.8 D-BU/WH 1315 Right Front Turn Signal Lamp Control III -
6 0.35 D-GN/ 6134 Body Control Module LIN Bus 3 I -
7 0.35 YE 196 Windshield Wiper Motor Park Switch Signal I -
8 - - - Not Occupied - -
9 0.5 BK/WH 451 Ground 4 II -
10 0.5 RD/WH 2840 Secondary Fused Battery Positive Voltage 28 II -
11 0.5 L-GN/ 1391 Left Front Door Lock Relay Control II -
12 0.35 YE 5187 Right Trailer Turn Signal Lamp Control I -
13 0.35 OG 5186 Left Trailer Turn Signal Lamp Control I -
14 - - - Not Occupied - -
15 0.35 OG 2268 Windshield Washer Relay Control I -
16 0.35 TN/WH 1969 Headlamp High Beam Relay Control I -
17 0.5 PK/BK 109 Hood Ajar Switch Signal II -
18 - - - Not Occupied - -
19 0.5 D-BU/ 5985 Accessory Wake-Up Serial Data II -
20 0.5 L-BU/ 1344 Rear Compartment Lid Release Relay Control 2 II -
21 0.35 YE 5199 Run/Crank Relay Coil Control I -
22 - - - Not Occupied - -
23 0.35 PU/ 544 DRL Relay Control I -
24 0.5 L-BU/ 244 Passenger Door Lock Switch Lock Control II -
25 - - - Not Occupied - -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.