Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
B218R Side Object Sensor Module - Right (UKI)
2020 GMC Acadia SLSECTION B218R Side Object Sensor Module - Right (UKI)
WARNING: This page is about a different car, the 2019 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-64B (LT BU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 | BU/YE | 3810 | High Speed GMLAN Serial Data (-) 5 | I | UKI |
| 2 | 0.5 | BU/WH | 3812 | High Speed GMLAN Serial Data (+) 5 | I | UKI |
| 3 | 0.35 | BK/WH | 1251 | Signal Ground | I | UKI |
| 4 - 5 | - | - | - | Not Occupied | - | - |
| 6 | 0.35 | GN | 5060 | Low Speed GMLAN Serial Data | I | UKI |
| 7 | 0.35 | GY | 1761 | Right Side Object Detection LED Control | I | UKI |
| 8 | 0.35 | RD/BN | 4940 | Battery Positive Voltage | I | UKI |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.