M129C Intake Camshaft Profile Actuator 3 (LSY)

2020 GMC Acadia SLSECTION M129C Intake Camshaft Profile Actuator 3 (LSY)
WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
GM3960142Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Engine Wiring Harness
  • OEM Connector: 13599894
  • Service Connector: 85005020
  • Description: 6-Way F 1.2 MCON-LL Series, Sealed (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool
I Not required J-35616-16 (L-GN) No Tool Required
Pin Size Color Circuit Function Terminal Type ID Option
1 0.5 YE/BU 3587 Intake Camshaft Profile Actuator 3 Control A I LSY
2 0.5 BK/GN 3593 Intake Camshaft Profile Actuator 3 Position Sensor Signal I LSY
3 0.5 BK/YE 548 Engine Control Sensors Low Reference 1 I LSY
4 0.5 BU/RD 460 Engine Control Sensors 5 Volt Reference 1 I LSY
5 0.5 VT/BU 5293 Powertrain Main Relay Fused Supply Voltage 4 I LSY
6 0.5 GY 3586 Intake Camshaft Profile Actuator 3 Control B I LSY
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.