Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
K157 Video Processing Control Module X1
2020 GMC Acadia SLSECTION K157 Video Processing Control Module X1
WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool |
|---|---|---|---|
| I | 19300632 | J-35616-64B (L-BU) | J-38125-215A |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 | RD/GN | 3140 | Battery Positive Voltage | I | UV2 |
| 2 | - | - | - | Not Occupied | - | - |
| 3 | 0.35 | BK | 2150 | Ground | I | UV2 |
| 4 - 8 | - | - | - | Not Occupied | - | - |
| 9 | 0.35 | GY/GN | 1102 | Low Speed GMLAN Serial Data 2 | I | UV2 |
| 10 | 0.5 | RD/GN | 3140 | Battery Positive Voltage | I | UV2 |
| 11 | - | - | - | Not Occupied | - | - |
| 12 | 0.35 | BK | 2150 | Ground | I | UV2 |
| 13 - 18 | - | - | - | Not Occupied | - | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.