SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2020ACADIA SLREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 438 (COMPONENT CONNECTOR END VIEWS (K20-K40))COMPONENT CONNECTOR END VIEWSK40 SEAT MEMORY CONTROL MODULE X5
2020 GMC Acadia SL

K40 Seat Memory Control Module X5

2020 GMC Acadia SLSECTION K40 Seat Memory Control Module X5
WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
GM2916473Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Front Seat Wiring Harness - Driver
  • OEM Connector: 7287-2043-30
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 26-Way F 0.64 Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool
I Not required J-35616-64B (L-BU) No Tool Required
Pin Size Color Circuit Function Terminal Type ID Option
1 0.5 WH/RD 3298 Seat Position Sensors High Reference 2 I  
2 - 3 - - - Not Occupied - -
4 0.5 BN 3038 Driver Seat Right Rear Haptic Movement Motor Control I  
5 0.5 YE/BN 3037 Driver Seat Left Rear Haptic Movement Motor Control I  
6 - - - Not Occupied - -
7 0.35 YE/BN 1522 Seat Horizontal Forward Switch Signal I  
8 0.35 GY/GN 1523 Seat Horizontal Rearward Switch Signal I  
9 0.35 GN/BN 1518 Seat Front Vertical Up Switch Signal I  
10 0.35 BU/VT 1520 Seat Front Vertical Down Switch Signal I  
11 0.35 GN 569 Seat Horizontal Motor Position Sensor Signal I  
12 0.35 BN/WH 557 Seat Front Vertical Motor Position Sensor Signal I  
13 - 18 - - - Not Occupied - -
19 0.35 YE 1519 Seat Rear Vertical Up Switch Signal I  
20 0.35 YE/BU 1521 Seat Rear Vertical Down Switch Signal I  
21 0.35 GY/BK 1269 Seat Recline Forward Switch Signal I  
22 0.35 GN/GY 1270 Seat Recline Rearward Switch Signal I  
23 - 24 - - - Not Occupied - -
25 0.35 YE/BU 568 Seat Rear Vertical Motor Position Sensor Signal I  
26 0.35 WH/BK 570 Driver Seat Recline Motor Position Sensor Signal I  
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.