SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2020ACADIA SLREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 438 (COMPONENT CONNECTOR END VIEWS (K20-K40))COMPONENT CONNECTOR END VIEWSK40 SEAT MEMORY CONTROL MODULE X3
2020 GMC Acadia SL

K40 Seat Memory Control Module X3

2020 GMC Acadia SLSECTION K40 Seat Memory Control Module X3
WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
GM5254826Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Front Seat Wiring Harness - Driver
  • OEM Connector: 7289-9152-40
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 12-Way F 2.8 Kaizen Series (L-GY)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool
I Not required J-35616-4A (PU) No Tool Required
Pin Size Color Circuit Function Terminal Type ID Option
1 1.5 GN/YE 276 Driver Seat Recline Motor Forward Control I  
2 1.5 BU/YE 277 Driver Seat Recline Motor Rearward Control I  
3 1.5 GN/BN 286 Driver Seat Front Vertical Motor Up Control I  
4 1.5 BU/VT 287 Driver Seat Front Vertical Motor Down Control I  
5 1.5 YE 282 Driver Seat Rear Vertical Motor Up Control I  
6 1.5 GY/BU 283 Driver Seat Rear Vertical Motor Down Control I  
7 - 10 - - - Not Occupied - -
11 1.5 YE/BU 285 Driver Seat Horizontal Motor Forward Control I  
12 1.5 GY/GN 284 Driver Seat Horizontal Motor Rearward Control I  
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.