K33 HVAC Control Module X1

2020 GMC Acadia SLSECTION K33 HVAC Control Module X1
WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
GM5109511Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Instrument Panel Wiring Harness
  • OEM Connector: 13525993
  • Service Connector: 13525993
  • Description: 20-Way F 0.64 Series (GN)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool
I 13584547 J-35616-64B (L-BU) J-38125-215A
Pin Size Color Circuit Function Terminal Type ID Option
1 - 3 - - - Not Occupied - -
4 0.35 BU/WH 734 Inside Air Temperature Sensor Signal I  
5 - 6 - - - Not Occupied - -
7 0.35 BK/BU 7566 Windshield Temperature and Inside Moisture Sensor Low Reference I  
8 - 13 - - - Not Occupied - -
14 0.35 YE/VT 1783 Ambient Light Sensor Signal I  
15 - 17 - - - Not Occupied - -
18 0.35 BN 404 Upper Duct Air Temperature Sensor Signal I  
19 0.35 BN/BK 405 Lower Duct Air Temperature Sensor Signal I  
20 - - - Not Occupied - -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.