SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2020ACADIA SLREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 183 (POWER OUTLETS)REPAIR INSTRUCTIONSACCESSORY AC AND DC POWER CONTROL MODULE BRACKET REPLACEMENT
2020 GMC Acadia SL

Accessory AC and DC Power Control Module Bracket Replacement

2020 GMC Acadia SLSECTION Accessory AC and DC Power Control Module Bracket Replacement
WARNING: This page is about a different car, the 2021 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
GM4420167Courtesy of GENERAL MOTORS COMPANY
NOTE: Callouts in the following chart represent components shown in graphic above.
Callout Component Name

Preliminary Procedures

  1. Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection
  2. Front Floor Console Rear Trim Panel Replacement (with Rear Vent) , or Front Floor Console Rear Trim Panel Replacement (with Auxiliary Heater and AC Control)
  3. Reposition the carpet, if necessary.
1 Accessory AC and DC Power Control Module Bolt [2x]
CAUTION:

Fastener Caution


Tighten 
2.5 N.m (22 lb in)
2 Accessory AC and DC Power Control Module Bracket

Procedure

  1. Disconnect the electrical connector.
  2. Transfer components as necessary.
  3. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.