SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2019YUKON XL DENALI, RWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTENTERTAINMENT SYSTEMSCELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM - REPAIR INSTRUCTIONSREPAIR INSTRUCTIONSHUMAN MACHINE INTERFACE CONTROL MODULE BRACKET REPLACEMENT (CADILLAC)
2019 GMC Yukon XL Denali, RWD

Human Machine Interface Control Module Bracket Replacement (Cadillac)

2019 GMC Yukon XL Denali, RWDSECTION Human Machine Interface Control Module Bracket Replacement (Cadillac)
GM3648846Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedure

  1. Remove the communication interface module bracket. Refer to Communication Interface Module Bracket Replacement (Chevrolet / GMC) Communication Interface Module Bracket Replacement (Cadillac) .
  2. Remove the human machine interface control module. Refer to Human Machine Interface Control Module Replacement (Chevrolet / GMC) Human Machine Interface Control Module Replacement (Cadillac) .
1 Human Machine Interface Control Module Bracket Fasteners (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
2.5 N.m (22 lb in)
2 Human Machine Interface Control Module Bracket
Procedure 
Transfer components, as necessary.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.