Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2019SAVANA 2500 LS, 2.8L ENG VIN 1REPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSSHIFT LOCK CONTROL SYSTEMREPAIR INSTRUCTIONSAUTOMATIC TRANSMISSION SHIFT LOCK CONTROL ACTUATOR REPLACEMENTREMOVAL PROCEDURE
2019 GMC Savana 2500 LS, 2.8L Eng VIN 1
Removal Procedure
2019 GMC Savana 2500 LS, 2.8L Eng VIN 1SECTION Removal Procedure
- WARNING:
Refer to SIR Warning .
Disable the SIR system. Refer to SIR Disabling and Enabling .
- Put the shift lever clevis into the neutral position.
- Remove the knee bolster bracket. Refer to Instrument Panel Knee Bolster Bracket Replacement (Left Side)Instrument Panel Knee Bolster Bracket Replacement (Right Side) .
- Disconnect the electrical connector.
- Use a small screwdriver to pry the A/T shift lock control actuator away from the steering column jacket assembly and the cable shift cam assembly.
- Remove the A/T shift lock control actuator.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.