Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSGMC2016SIERRA 3500 HD SLE, 4D CAB CHASSIS, 6.6L ENG VIN 8, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - K33X3 TO K111COMPONENT CONNECTOR END VIEWSK59 STARTER/GENERATOR CONTROL MODULE X1
2016 GMC Sierra 3500 HD SLE, 4D Cab Chassis, 6.6L Eng VIN 8, 4WD
K59 Starter/Generator Control Module X1
2016 GMC Sierra 3500 HD SLE, 4D Cab Chassis, 6.6L Eng VIN 8, 4WDSECTION K59 Starter/Generator Control Module X1
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13575812 | J-35616-64B (LT BU) | J-38125-213 | Not Available | Not Available | Not Available | Not Available |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 | VT/GN | 439 | Run/Crank Ignition 1 Voltage | I | - |
| 2 | 0.5 | VT/YE | 5985 | Accessory Wakeup Serial Data | I | - |
| 3 | 0.5 | BU | 2500 | High Speed GMLAN Serial Data (+) 1 | I | - |
| 4 | 0.5 | WH | 2501 | High Speed GMLAN Serial Data (-) 1 | I | - |
| 5 | 0.5 | BU/BK | 7493 | High Speed GMLAN Serial Data (+)3 | I | - |
| 6 | 0.5 | WH | 7494 | High Speed GMLAN Serial Data (-)3 | I | - |
| 7 | 0.75 | BU | 7645 | Traction Power Inverter Module Resolver 1 Excitation Signal Positive | I | - |
| 8 | 0.75 | WH/GN | 7648 | Traction Power Inverter Module Traction Power Inverter Module Resolver 1 Excitation Signal Negative | I | - |
| 9 | 0.75 | BN | 7652 | Traction Power Inverter Module Resolver 1 S3 Signal | I | - |
| 10 | 0.75 | YE | 7649 | Traction Power Inverter Module Resolver 1 S1 Signal | I | - |
| 11 | 0.75 | VT/GN | 7647 | Transmission Traction Power Inverter Module Resolver 1 S2 Signal | I | - |
| 12 | 0.75 | GY | 7646 | Transmission Traction Power Inverter Module Resolver 1 S4 Signal | I | - |
| 13 - 16 | - | - | - | Not Occupied | - | - |
| 17 | 0.5 | BU | 2500 | High Speed GMLAN Serial Data (+) 1 | I | - |
| 18 | 0.5 | WH | 2501 | High Speed GMLAN Serial Data (-) 1 | I | - |
| 19 | 0.5 | BU/BK | 7493 | High Speed GMLAN Serial Data (+)3 | I | - |
| 20 | 0.5 | WH | 7494 | High Speed GMLAN Serial Data (-)3 | I | - |
| 21 - 27 | - | - | - | Not Occupied | - | - |
| 28 | 0.5 | WH | 5359 | Brake Apply Sensor Control | I | - |
| 29 - 38 | - | - | - | Not Occupied | - | - |
| 39 | 0.5 | BK/BN | 5360 | Brake Apply Sensor Low Reference | I | - |
| 40 | 0.5 | BK/GY | 3872 | Powertrain Electronics Cooling Loop (PECL) Temperature Sensor Low Reference | I | - |
| 41 | - | - | - | Not Occupied | - | - |
| 42 | 0.5 | WH/BN | 3768 | MGU Coolant Pump Relay Control | I | - |
| 43 - 48 | - | - | - | Not Occupied | - | - |
| 49 | 0.5 | VT/BU | 3790 | Electric Coolant Motor Feedback Signal | I | - |
| 50 - 52 | - | - | - | Not Occupied | - | - |
| 53 | 0.5 | BU/YE | 5361 | Brake Apply Sensor Signal | I | - |
| 54 | 0.5 | GY/VT | 3873 | Powertrain Electronics Cooling Loop (PECL) Temperature Sensor Signal | I | - |
| 55 | - | - | - | Not Occupied | - | - |
| 56 | 0.5 | WH/GY | 4578 | Surge Accumulator Solenoid Low Side Control | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.