Circuit/System Verification

2016 GMC Sierra 3500 HD SLE, 4D Cab Chassis, 6.6L Eng VIN 8, 4WDSECTION Circuit/System Verification
NOTE:

Test or replace the remote control batteries before performing the circuit/system verification.

  1. Verify no DTCs are present.
    • If no DTCs are present 
  2. Ignition ON, rear seat entertainment system ON.
  3. Verify that all remote control buttons operate and perform the correct function.
    • If some, but not all, controls operate. 

      Replace the remote control.

    • If all controls are inoperative. 
    1. Replace the P22A Video Display- 2nd Row. Ignition ON, rear seat entertainment system ON.
    2. Verify that all remote control buttons operate and perform the correct function.
      • If some, but not all, controls operate, replace the remote control.
      • If all controls are inoperative, replace the A33 Media Disc Player.
      • If all controls operate and perform the correct function.
    3. All OK.
    • If all controls operate and perform the correct function. 
  4. All OK.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.