Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Circuit/System Description
The haptic seats, also known as safety alert seats, provide a vibration to alert the driver in certain circumstances. There are two motors in the driver seat cushion. Either the right or left motor can run or both depending on the alert. The seat memory control module provides the output voltage for the motors. The seat memory control module receives serial data requests from other modules to activate the appropriate seat motors with the number of pulses requested. While the motors are activated, the seat memory control module checks for either shorts to voltage or shorts to ground. Due to the nature of the PWM signal, if a motor circuit is open, it may be reported as either a short to voltage or short to ground.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.