Parking Assist Alarm Sensor Ring Replacement

2016 GMC Sierra 3500 HD SLE, 4D Cab Chassis, 6.6L Eng VIN 8, 4WDSECTION Parking Assist Alarm Sensor Ring Replacement
Fig 1: Parking Assist Alarm Sensor Ring
GM3543224Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove either the front or rear parking assist alarm sensor. Refer to Front Parking Assist Alarm Sensor Replacement (Chevrolet Outer) Front Parking Assist Alarm Sensor Replacement (GMC Outer) Front Parking Assist Alarm Sensor Replacement (Center) , Rear Parking Assist Alarm Sensor Replacement (Outer) Rear Parking Assist Alarm Sensor Replacement (Center) .
1 Front Parking Assist Alarm Sensor Ring
Procedure 
Pull the parking assist alarm sensor ring from the parking assist alarm sensor
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.