Intake Air Temperature Signal Modification Module (LC8)

2013 GMC Sierra 3500 HD WT, 2D Pickup, 6.0L Eng VIN G, RWD, GasSECTION Intake Air Temperature Signal Modification Module (LC8)
GM2268728
Connector Part Information
  • Harness Type: CNG Harness
  • OEM Connector: 33472-0806
  • Service Connector: 13577527
  • Description: 8-Way F 1.5 Series, Sealed (BK)
Terminal Part Information
  • Terminated Lead: Service by Connector Assembly - 13577527
  • Release Tool: Pending
  • Diagnostic Test Probe: Pending
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp: Not Available
Intake Air Temperature Signal Modification Module (LC8)

Pin Size Color Circuit Function Option
1 1 GN - Battery Positive Voltage -
2 0.35 GN/WH - CNG Switched 12 Volt Signal -
3 - - - Not Occupied -
4 0.5 TN/RD - IAT Sensor Signal -
5 1 BK - Ground -
6-7 - - - Not Occupied -
8 0.5 TN/BK - IAT Sensor Signal -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.