SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2013SAVANA H1500, VAN CARGOREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINSTRUMENT PANEL TRIM AND CONSOLE TRIMREPAIR INSTRUCTIONSINSTRUMENT PANEL UPPER TRIM PAD REPLACEMENT
2013 GMC Savana H1500, Van Cargo

Instrument Panel Upper Trim Pad Replacement

2013 GMC Savana H1500, Van CargoSECTION Instrument Panel Upper Trim Pad Replacement
Fig 1: Instrument Panel Upper Trim Pad & Mounting Components
GM1891938Courtesy of GENERAL MOTORS COMPANY
Instrument Panel Upper Trim Pad Replacement

Callout Component Name

Preliminary Procedures

  1. Remove the drivers knee bolsters bracket. Refer to Driver Knee Bolster Bracket Replacement .

    Remove the cluster trim plate assembly. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

  2. Remove the windshield garnish moldings. Refer to Windshield Garnish Molding Replacement .
1 Instrument Panel Upper Trim Pad Screw (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
3 N.m (27 lb in)
2 Instrument Panel Upper Trim Pad Assembly

Procedure

  1. Disconnect the electrical connections.
  2. When replacing the upper trim pad , transfer all necessary components.
3 Retainer Clip (Qty: 4)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.