Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
2013 GMC Savana H1500, Van CargoSECTION Removal Procedure
- Remove the right side rear door trim panel. Refer to Rear Side 60/40 Door Trim Panel Replacement - Right Side (E24, 40 Door) , Rear Side 60/40 Door Trim Panel Replacement - Right Side (E24, 60 Door) .
- Remove the rivet (4) at the rear edge of the rear door inside handle.
- Slide the rear door inside handle forward.
- Remove the rear door inside handle from the right rear door.
- Remove the lock rods (3) from the rear door inside handle.
- Remove the rear door inside handle from the right rear door.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.