Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2011YUKON BASE, 5.3 0, RWDREPAIR AND DIAGNOSISBODY & FRAMEDOOR LOCKSPOWER DOOR LOCK SYSTEM AND RELEASE SYSTEMSSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2011 GMC Yukon Base, 5.3 0, RWD
Fastener Tightening Specifications
2011 GMC Yukon Base, 5.3 0, RWDSECTION Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Door Lock Screws | 10 N.m | 89 lb in |
| Door Striker Bolts | 24 N.m | 18 lb ft |
| Liftgate Close Actuator Bracket Bolts | 30 N.m | 22 lb ft |
| Outside Door Handle Bolts | 8 N.m | 71 lb in |
| Power Liftgate Switch Screw | 0.2 N.m | 1.7 lb in |
| Side Door Inside Handle Bolt | 2 N.m | 18 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.