Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2011SAVANA SPECIAL 4.8 AREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 208 (STEERING LINKAGE SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2011 GMC Savana Special 4.8 A
Fastener Tightening Specifications
2011 GMC Savana Special 4.8 ASECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2011 GMC Savana and 2011 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Idler Arm to Frame Mounting Bolts | 150 N.m | 111 lb ft |
| Idler Arm to Relay Rod Retaining Nut | 63 N.m | 47 lb ft |
| InnerTie Rod to Relay Rod Retaining Nut | 112 N.m | 83 lb ft |
| Pitman Arm to Relay Rod Retaining Nut | 63 N.m | 47 lb ft |
| Pitman Arm to Steering Gear Retaining Nut | 250 N.m | 184 lb ft |
| Tie Rod to Steering Knuckle Retaining Nut | 63 N.m | 47 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.