Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Steering Wheel Control Switch Assembly Replacement
2011 GMC Savana Special 4.8 ASECTION Steering Wheel Control Switch Assembly Replacement
WARNING: This page is about a different car, the 2011 GMC Savana and 2011 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
Steering Wheel Control Switch Assembly Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the inflatable restraint steering wheel module. Refer to Steering Wheel Inflatable Restraint Module Replacement . |
|
| 1 | Steering Wheel Trim Plate Screw (Qty: 4)
CAUTION:
Refer to Fastener Caution . Tighten 2 N.m (18 lb in) |
| 2 | Steering Wheel Trim Plate (Qty: 2) |
| 3 | Radio Control Screw (Qty: 6)
CAUTION:
Refer to Fastener Caution . Tighten 2 N.m (18 lb in) |
| 4 | Radio Control Switch Assembly Procedure
|
| 5 | Cruise Control Switch Assembly Procedure
|
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.