SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2011SAVANA SPECIAL 4.8 AREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 176 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - FUEL INJECTOR 6 THROUGH YAW SENSOR)COMPONENT CONNECTOR END VIEWSINFLATABLE RESTRAINT I/P MODULE DISABLE SWITCH (C99)
2011 GMC Savana Special 4.8 A

Inflatable Restraint I/P Module Disable Switch (C99)

2011 GMC Savana Special 4.8 ASECTION Inflatable Restraint I/P Module Disable Switch (C99)
WARNING: This page is about a different car, the 2011 GMC Savana, 2011 Chevrolet RV Cutaway, 2011 Chevrolet Cutaway, and 2011 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Connector End View Inflatable Restraint I/P Module Disable Switch (C99)
GM362753Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint I/P Module Disable Switch (C99)

Pin Wire Circuit Function
A 0.5 TN/BK 371 Instrument Panel Module Disable Switch- Signal
B 0.35 PK 1139 Ignition Voltage
C 0.5 BN 2309 Front Park Lamps Control
D 0.35 YE 6817 LED Backlight Dimming Control
E 0.5 PK 353 Instrument Panel Module Suppression Indicator Control
F 0.5 BK/WH 1751 Ground
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 15305286
  • Service Connector: 15306014
  • Description: 6-Way F Metri-Pack 150 Series (YE)
Terminal Part Information
  • Terminated Lead: 13575725
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-14 (GN)
  • Terminal/Tray: 12129484/19
  • Core/Insulation Crimp: E/C
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.