Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2011SAVANA G2500, VAN CARGO, 6.0 GREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - FUEL INJECTOR 6 THROUGH YAW SENSORCOMPONENT CONNECTOR END VIEWSPARK/NEUTRAL POSITION (PNP) SWITCH (M30)
2011 GMC Savana G2500, Van Cargo, 6.0 G
Park/Neutral Position (PNP) Switch (M30)
2011 GMC Savana G2500, Van Cargo, 6.0 GSECTION Park/Neutral Position (PNP) Switch (M30)
Park/Neutral Position (PNP) Switch (M30)
| Pin | Wire | Circuit | Function |
|---|---|---|---|
| A | 0.5 OG/BK | 1786 | Ignition Lock Cylinder Control Actuator Signal |
| B | 0.5 YE/BK | 773 | Transmission Range Switch Signal C |
| C | 0.5 RD/BK | 771 | Transmission Range switch Signal A |
| D | 0.5 D-GN/WH | 772 | Transmission Range Switch Signal B |
| E | 0.5 GY/WH | 776 | Transmission Range Switch Signal P |
| F | 0.5 BK/WH | 1050 | Ground |
Connector Part Information
Terminal Part Information
|
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.