Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSGMC2011CANYON 4WD L4-2.9LREPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTTOWING / TRAILER SYSTEMTOWING HOOK / BRACKETSERVICE AND REPAIR
2011 GMC Canyon 4WD L4-2.9L
Towing Hook / Bracket: Service and Repair
2011 GMC Canyon 4WD L4-2.9LSECTION Service and Repair
Tow Hook Replacement
Removal Procedure
1.Remove the front bumper. Refer to Front Bumper Replacement Service and Repair .
2.Remove the right tow hook nuts and bolts from the frame rail.
3.Remove the right tow hook from the vehicle.
4.Remove the left tow hook nuts and bolts from the frame rail.
5.Remove the left tow hook from the vehicle.
Installation Procedure
1.Install the left tow hook to the frame rail.
Caution:Refer to Fastener Caution .
2.Tighten the left tow hook nuts and bolts to100 N οΏ½m (74 lb ft).
3.Install the right tow hook to the frame rail.
4.Tighten the right tow hook nuts and bolts to100 N οΏ½m (74 lb ft).
5.Install the front bumper. Refer to Front Bumper Replacement Service and Repair .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.