Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2011CANYON 2D PICKUP, 2.9 9, 4WD, AUTOMATICREPAIR AND DIAGNOSISHEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSHEATING, VENTILATION, AND AIR CONDITIONINGREPAIR INSTRUCTIONSAIR CONDITIONING CONDENSER REPLACEMENTREMOVAL PROCEDURE
2011 GMC Canyon 2D Pickup, 2.9 9, 4WD, Automatic
Removal Procedure
2011 GMC Canyon 2D Pickup, 2.9 9, 4WD, AutomaticSECTION Removal Procedure
- Remove the radiator. Refer to Radiator Replacement .
- Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
- Remove the receiver dryer.
- Remove the condenser inlet hose bolt.
- Remove the condenser inlet hose.
- Remove the condenser outlet hose bolt.
- Remove the condenser outlet hose.
- Remove the condenser from mounts on the radiator (1).
- Remove the condenser.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.