Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2010SAVANA SPECIAL 6.0 GREPAIR AND DIAGNOSISENGINE MECHANICALSTARTERBATTERY, CHARGING SYSTEM AND STARTING SYSTEMREPAIR INSTRUCTIONS (BATTERY, CHARGING SYSTEM AND STARTING SYSTEM)AUXILIARY BATTERY NEGATIVE CABLE REPLACEMENT (LGH,LMM)INSTALLATION PROCEDURE (BATTERY, CHARGING SYSTEM AND STARTING SYSTEM)
2010 GMC Savana Special 6.0 G
Installation Procedure (Battery, Charging System And Starting System)
2010 GMC Savana Special 6.0 GSECTION Installation Procedure (Battery, Charging System And Starting System)
- Install the auxiliary battery negative cable to the vehicle.
- Connect the auxiliary negative ground terminal bolt (1) to the frame and tighten to 10 N.m (89 lb in).
- Connect the auxiliary battery negative cable (2) to the auxiliary battery and tighten to 14 N.m (123 in lb).
CAUTION:
Refer to Fastener Caution
.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.