Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSGMC2010SAVANA SPECIAL 6.0 GREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEMIRRORSMIRROR SYSTEMREPAIR INSTRUCTIONSMANUAL MIRROR REPLACEMENT (DHC)

2010 GMC Savana Special 6.0 G

Manual Mirror Replacement (DHC)

2010 GMC Savana Special 6.0 GSECTION Manual Mirror Replacement (DHC)

Fig 1: View Of Manual Mirror (DHC)

Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

Preliminary Procedures

Place the window in the fully down position.
Remove front door trim panel. Refer to Front Door Trim Plate Replacement .

Outside Rearview Mirror Bolt (Qty: 3)

CAUTION: Refer to Fastener Caution Fastener Caution.

Tighten: 10 N.m (89 lb in).

Outside Rearview Mirror
Procedure:
Inspect the mirror for proper operation before installing the door trim panel.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.