Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2010SAVANA 4500 V8-6.6L DSL TURBOREPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINESERVICE AND REPAIROVERHAUL89. OIL PUMP SUCTION PIPE AND SCREEN ASSEMBLY INSTALLATION
2010 GMC Savana 4500 V8-6.6L DSL Turbo
89. Oil Pump Suction Pipe and Screen Assembly Installation
2010 GMC Savana 4500 V8-6.6L DSL TurboSECTION 89. Oil Pump Suction Pipe and Screen Assembly Installation
Oil Pump Suction Pipe and Screen Assembly Installation
1. Install the NEW oil pump pipe and screen seal (1).
2. Install the oil pump pipe and screen (2).
Caution: Refer to Fastener Caution (Fastener Caution).
3. Install the oil pump pipe and screen assembly bolts (3) and (4) and tighten to 25 Nm (18 lb ft).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.