SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2009SIERRA 2500 HD, 2D PICKUP, 6.0 K, 4WD, PART TIMEREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMDATA COMMUNICATION SYSTEMREPAIR INSTRUCTIONSBODY CONTROL MODULE BRACKET REPLACEMENT
2009 GMC Sierra 2500 HD, 2D Pickup, 6.0 K, 4WD, Part Time

Body Control Module Bracket Replacement

2009 GMC Sierra 2500 HD, 2D Pickup, 6.0 K, 4WD, Part TimeSECTION Body Control Module Bracket Replacement
Fig 1: View Of Front Floor Heater Duct Retainer, BCM Bracket Assembly & Screws
GM1809306Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the knee bolster panel. Refer to Knee Bolster Replacement (With RPO SLT) or Knee Bolster Replacement (Without RPO SLT) .
  2. Remove the instrument panel driver knee bolster deflector. Refer to Instrument Panel Driver Knee Bolster Deflector Replacement (With RPO SLT) or Instrument Panel Driver Knee Bolster Deflector Replacement (Without RPO SLT) .
1 Front Floor Heater Duct Retainer
2 Body Control Module Bracket Screws (Qty: 3)
CAUTION: Refer to Fastener Caution .

Tighten:  2 N.m (18 lb in)
3 Body Control Module Bracket Assembly
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.