Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSGMC2009CANYON 4D PICKUP, 2.9 9REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 80 (COMPONENT LOCATIONS - COMPONENT VIEWS)INSTRUMENT PANEL/CENTER CONSOLE COMPONENT VIEWS
2009 GMC Canyon 4D Pickup, 2.9 9
Instrument Panel/Center Console Component Views
2009 GMC Canyon 4D Pickup, 2.9 9SECTION Instrument Panel/Center Console Component Views
WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Turn Signal/Multifunction Switch |
| 2 | Instrument Panel Cluster (IPC) |
| 3 | Hazard Switch |
| 4 | Accessory Switch |
| 5 | Ambient Light Sensor |
| 6 | Inflatable Restraint I/P Module |
| 7 | Radio |
| 8 | Auxiliary Power Outlet 2 |
| 9 | Auxiliary Power Outlet 1 |
| 10 | HVAC Control Module |
| 11 | Inflatable Restraint Steering Wheel Module |
| 12 | Headlamp and Panel Dimmer Switch |
| Callout | Component Name |
|---|---|
| 1 | Digital Radio Receiver |
| Callout | Component Name |
|---|---|
| 1 | HVAC Module Assembly |
| 2 | Evaporator Temperature Sensor (C60) |
| 3 | X203 |
| 4 | Recirculation Actuator (C60) |
| 5 | Blower Motor |
| 6 | Blower Motor Resistor Assembly |
| Callout | Component Name |
|---|---|
| 1 | X275 |
| 2 | A/T Shift Lock Control Solenoid Connector |
| 3 | Body Harness |
| 4 | Accelerator Pedal Position (APP) Sensor Connector |
| 5 | Accelerator Pedal |
| 6 | Accelerator Pedal Position (APP) Sensor |
| 7 | A/T Shift Lock Control Solenoid |
| 8 | Ignition Switch |
| Callout | Component Name |
|---|---|
| 1 | Vehicle Communications Interface Module (VCIM) X1 (UE1) |
| 2 | Vehicle Communications Interface Module (VCIM) X2 (UE1) |
| 3 | Vehicle Communications Interface Module (VCIM) (UE1) |
| 4 | Courtesy Lamp - Footwell Right |
| 5 | Courtesy Lamp - Footwell Left |
| 6 | Data Link Connector (DLC) |
| Callout | Component Name |
|---|---|
| 1 | Park Brake Switch Connector |
| 2 | Body Harness |
| 3 | Park Brake Switch |
| 4 | Park Brake Lever |
| 5 | Cowel Side Inner Panel |
| Callout | Component Name |
|---|---|
| 1 | Inflatable Restraint Steering Wheel Module Connectors |
| 2 | Retainment Nut |
| 3 | Horn Switch Connector |
| 4 | Horn Contact |
| Callout | Component Name |
|---|---|
| 1 | Body Harness |
| 2 | I/P Harness |
| 3 | Body Control Module (BCM) |
| 4 | X201 |
| 5 | Body Control Module (BCM) X2 |
| 6 | Body Control Module (BCM) X1 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.