SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2009CANYON 4D PICKUP, 2.9 9REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 75 (SUNROOF SYSTEM)REPAIR INSTRUCTIONSSUNROOF WINDOW REPLACEMENTINSTALLATION PROCEDURE
2009 GMC Canyon 4D Pickup, 2.9 9

Installation Procedure

2009 GMC Canyon 4D Pickup, 2.9 9SECTION Installation Procedure
WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the sunroof window to the module.
    2. Fig 1: Removing/Installing Locker Slider
    GM1774169Courtesy of GENERAL MOTORS CORP.
  2. Install the locker slider (1).
    1. Rotate the lever forward, align the locker slider with the hole in the lever and slider forward.
    2. Using a suitable tool, insert it between the track and the lever to lock it in place.

      The track is not serviceable, if damaged replace the sunroof window.

    3. Fig 2: Removing/Installing Drive Cables
    GM1774163Courtesy of GENERAL MOTORS CORP.
  3. Install the drive cables (1) and sliders (2) to the guides.
    4. Fig 3: Removing/Installing sunroof module guides
    GM1774162Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.