Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fastener Tightening Specifications
2009 GMC Canyon 4D Pickup, 2.9 9SECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Antilock Brake System Module to Mounting Bracket Nuts | 9 N.m | 80 lb in |
| Brake Caliper Bracket Bolts | 175 N.m | 129 lb ft |
| Brake Pipe Fittings to Antilock Brake System Module Fittings | 19 N.m | 14 lb ft |
| Electronic Control Unit to Hydraulic Control Unit Bolts | 5 N.m | 44 lb in |
| Longitudinal Accelerometer Nuts | 9 N.m | 80 lb in |
| Wheel Hub and Bearing Bolts | 125 N.m | 92 lb ft |
| Wheel Speed Sensor Harness Bracket Bolt | 20 N.m | 14 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.