SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2009CANYON 4D PICKUP, 2.9 9REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 37 (ANTI-LOCK BRAKE SYSTEM, TRACTION CONTROL SYSTEM & STABILITY CONTROL SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESDTC C0201CONDITIONS FOR SETTING THE DTC
2009 GMC Canyon 4D Pickup, 2.9 9

Conditions for Setting the DTC

2009 GMC Canyon 4D Pickup, 2.9 9SECTION Conditions for Setting the DTC
WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

One or more of the fallowing conditions exists:

  • The EBCM detects an open in the battery positive voltage circuit to the solenoid valve relay.
  • The EBCM detects a stuck open solenoid valve relay or an open circuit between the solenoid valve relay and solenoid valves.
  • The EBCM detects an open in the battery positive voltage circuit to the solenoid valve relay.
  • The EBCM detects that one or more of the pump motor relays is off when commanded on.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.