Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2009CANYON 4D PICKUP, 2.9 9REPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTILOCK BRAKE SYSTEMSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2009 GMC Canyon 4D Pickup, 2.9 9
Fastener Tightening Specifications
2009 GMC Canyon 4D Pickup, 2.9 9SECTION Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Pipe Fitting - Brake Pressure Modulator Valve (BPMV) Outlet | 19 N.m | 14 lb ft |
| Brake Pipe Fitting - BPMV Inlet | 32 N.m | 24 lb ft |
| BPMV Bracket Bolt | 11 N.m | 97 lb in |
| BPMV Bracket Nut | 9 N.m | 80 lb in |
| Electronic Brake Control Module (EBCM) Bolt | 2 N.m | 18 lb in |
| Longitudinal Accelerometer Nut | 9 N.m | 80 lb in |
| Wheel Speed Sensor Bolt - Front | 8 N.m | 71 lb in |
| Wheel Speed Sensor Bolt - Rear | 17 N.m | 13 lb ft |
| Wheel Speed Sensor Bracket Bolt | 9 N.m | 80 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.