P0315

DTC P0315

CIRCUIT DESCRIPTION
The crankshaft position (CKP) system variation learn feature is used to calculate reference period errors caused by slight tolerance variations in the crankshaft and the CKP sensor. The calculated error allows the powertrain control module (PCM) to accurately compensate for reference period variations. This enhances the ability of the PCM to detect misfire events over a wider range of engine speed and load conditions.

The PCM stores the CKP system variation values after a learn procedure has been performed. If the actual crankshaft position variation is not within the crankshaft position system variation compensating values stored in the PCM, DTC P0300 may set. If the PCM detects the CKP system variation values are not stored in the PCM memory, DTC P0315 sets.

DTC DESCRIPTOR
This diagnostic procedure supports the following DTC:
DTC P0315 Crankshaft Position (CKP) System Variation Not Learned

CONDITIONS FOR RUNNING THE DTC
- DTCs P0335, P0336, P0341, P1345 are not set.
- The engine coolant temperature (ECT) is more than 65°C (149°F).

CONDITIONS FOR SETTING THE DTC
The CKP system variation values are not stored in the PCM memory.

ACTION TAKEN WHEN THE DTC SETS
- The control module illuminates the malfunction indicator lamp (MIL) when the diagnostic runs and fails.
- The control module records the operating conditions at the time the diagnostic fails. The control module stores this information in the Freeze Frame/Failure Records.

CONDITIONS FOR CLEARING THE MIL/DTC
- The control module turns OFF the malfunction indicator lamp (MIL) after 3 consecutive ignition cycles that the diagnostic runs and does not fail.
- A current DTC, Last Test Failed, clears when the diagnostic runs and passes.
- A history DTC clears after 40 consecutive warm-up cycles, if no failures are reported by this or any other emission related diagnostic.
- Clear the MIL and the DTC with a scan tool.

TEST

Step 1 - Step 5: