Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2006SAVANA 2500 V8-6.0L VIN UREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINMANUAL TRANSMISSION/TRANSAXLESERVICE AND REPAIR19. TRANSMISSION EXTENSION ASSEMBLE
2006 GMC Savana 2500 V8-6.0L VIN U
19. Transmission Extension Assemble
2006 GMC Savana 2500 V8-6.0L VIN USECTION 19. Transmission Extension Assemble
Transmission Extension Assemble
^ Tools Required
- J 8092 Universal Driver Handle
- J 22834-A Extension Housing Seal Installer
- J 38807 Extension Housing Bearing Installer
1. For the C model, using the J 38807 (1) and the J 8092 (2), install the rear output shaft rear bearing in the transmission extension.
2. For the C model, install the mainshaft rear bearing retainer ring.
3. For C model, install a new mainshaft seal using the J 22834-A in the transmission extension.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.