Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2006CANYON 4WD L5-3.5L VIN 6REPAIR AND DIAGNOSISBODY AND FRAMESEATSSERVICE AND REPAIRREMOVAL AND REPLACEMENTSEAT REPLACEMENT - FOLDING (EXTENDED CAB)
2006 GMC Canyon 4WD L5-3.5L VIN 6
Seat Replacement - Folding (Extended Cab)
2006 GMC Canyon 4WD L5-3.5L VIN 6SECTION Seat Replacement - Folding (Extended Cab)
Seat Replacement - Folding (Extended Cab)
Removal Procedure
1. Remove the 2 bolts securing the folding rear seat cushion assembly to the vehicle.
2. Remove the rear seat from the vehicle.
Installation Procedure
1. Position the folding rear seat cushion assembly in the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 2 bolts securing the folding rear seat cushion assembly to the vehicle.
Tighten the folding rear seat cushion assembly bolts to 52.5 N.m (39 lb ft).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.