Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2006CANYON 2WD L5-3.5L VIN 6REPAIR AND DIAGNOSISBODY AND FRAMESEATSSEAT BACKSERVICE AND REPAIRPROCEDURESSEAT BACK COVER AND PAD REPLACEMENT - REAR (EXTENDED CAB)
2006 GMC Canyon 2WD L5-3.5L VIN 6
Seat Back Cover and Pad Replacement - Rear (Extended Cab)
2006 GMC Canyon 2WD L5-3.5L VIN 6SECTION Seat Back Cover and Pad Replacement - Rear (Extended Cab)
SEAT BACK COVER AND PAD REPLACEMENT - REAR (EXTENDED CAB)
REMOVAL PROCEDURE
1. Remove the rear seat back from the vehicle by grasping the back and lifting straight up.
2. Remove the hog rings (1) from the cover (2).
3. Remove the seat back cover from the seat back frame/pad.
INSTALLATION PROCEDURE
1. Install the seat back cover over the seat back frame/pad.
2. Install the hog rings (1) on the cover (2).
3. Install the rear seat back in the vehicle by aligning the hooks in the slots and pushing the seat back downward.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.