Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 GMC C3500 HD 6.5 F, AutomaticFACTORY OEM SERVICE PROCEDURE
Anti-Lock Brake System: Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Combination Valve to BPMV Bolts | 16 N.m | 12 lb ft |
| EBCM to BPMV Bolts | 5 N.m | 39 lb in |
| EHCU Bracket to Vehicle Bracket Mounting Bolts | 12 N.m | 9 lb ft |
| EHCU to Bracket Bolts | 9 N.m | 7 lb ft |
| Front Brake Lines to BPMV | 25 N.m | 18 lb ft |
| Front Wheel Speed Sensor Harness Bracket Bolt | 17 N.m | 13 lb ft |
| Front Wheel Speed Sensor Mounting Nuts | 13 N.m | 10 lb ft |
| Master Cylinder Brake Lines to BPMV | 25 N.m | 18 lb ft |
| Rear Brake Line to BPMV | 25 N.m | 18 lb ft |
| Rotor to Hub Bolts | 237 N.m | 175 lb ft |
| Splash Shield Mounting Bolts | 17 N.m | 13 lb ft |
| Steering Knuckle to Front Caliper Bracket Mounting Nuts | 285 N.m | 210 lb ft |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
