SYS.OK|MANUAL.DB● LIVE
2001 GMC Sonoma 2D Pickup, 2.2 5, Automatic

Quick Lookups: Fluids

2001 GMC Sonoma 2D Pickup, 2.2 5, AutomaticSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/o Rear AC 8.00 OZS. 0.23 L PAG 46 S
Air Cond Compressor Oil w/Rear A/C 11.00 OZS. 0.32 L PAG 46 S
Air Cond Refrigerant 1.88 LBS. 0.85 KG R-134a S
Automatic Transmission Fluid Drain and Refill 5.00 QTS. 4.73 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Automatic Transmission Fluid Overhaul 11.00 QTS. 10.4 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Front 2.60 PTS. 1.23 L SAE 80W-90 Gear Oil S
Differential Gear Oil Rear 4.00 PTS. 1.89 L SAE 80W-90 Gear Oil Rear Axle Locking Differential Gear Oil; use only (GM Part No.1052271). S
Engine Coolant 2.2L Eng 9.90 QTS. 9.36 L 50/50 mixture of DEX-COOL and clean, drinkable water S
Engine Oil w/Filter 4.50 QTS. 4.25 L API - SAE 5W-30 S
Fuel Tank Crew Cab 19.00 GALS. 71.92 L S
Fuel Tank Reg./Ext. Cab 18.50 GALS. 70.03 L S
Manual Transmission Fluid In-Line4 2.20 QTS. 2.08 L Friction Modified Synchromesh Transmission Fluid S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 89021184. S
Transfer Case Fluid 1.10 QTS. 1.04 L Manual Transmission Fluid GM Part No. 88861800. S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.