Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2001SAFARI VAN 2WD V6-4.3L VIN WREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINAUTOMATIC TRANSMISSION/TRANSAXLESERVICE AND REPAIROVERHAULREPAIR INSTRUCTIONS87. CONVERTER HOUSING INSTALLATION
2001 GMC Safari Van 2WD V6-4.3L VIN W
87. Converter Housing Installation
2001 GMC Safari Van 2WD V6-4.3L VIN WSECTION 87. Converter Housing Installation
^ Tools Required
- J 41510 50 mm Torx Plus Bit
1. Install the converter housing (102).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the converter housing bolts (94) to the transmission case. Use the J 41510.
^ Tighten the converter housing bolts (94) to 65 - 75 Nm (48 - 55 ft. lbs.).
- J 41510 50 mm Torx Plus Bit
1. Install the converter housing (102).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the converter housing bolts (94) to the transmission case. Use the J 41510.
^ Tighten the converter housing bolts (94) to 65 - 75 Nm (48 - 55 ft. lbs.).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.